Titanium Coils & Sheets
Gr.2, Titanium Coils & Sheets, Titanium plates, Titanium board, ASTM B265
Grades:
CP Ti Grades 1, 2, 3, 4, 7/11, 12, 33
Ti 6Al-4V, Ti 6Al-4VELI, Ti-3Al-2.5V, Ti6242 (6Al-2Sn-4Zr-2Mo),
Specifications:
ASTM B265 / ASME SB265, ASTM F136, ASTM F67, AMS4911
Thickness:
From 0.012"-0.1875"
From 0.3-4.76mm
Specifications of Titanium Sheet:
| Product | Thickness (mm) | Width (mm) | Length (mm) |
| Titanium Sheet | 0.5-0.8 | 800 max, Ti 6Al-4V | 2000 max |
| 1000 max, CP Ti | |||
| Titanium Sheet | 0.8-5 | 1000 max | 3000 max |
| Titanium Plate | 5-8 | 2000 max | 4000 max |
| Titanium Plate | 8-100 | 2500 max | 6000 max |
| Product | Thickness (inches) | Width (inches) | Length (inches) |
| Titanium Sheet | 0.020"-0.032" | 31.5" max, Ti-6Al-4V | 78.7" max |
| 39.4" max, C.P. Ti | |||
| Titanium Sheet | 0.032"-0.20" | 39.4" max | 118.1" max |
| Titanium Plate | 0.20"-0.32" | 78.7" max | 157.5" max |
| Titanium Plate | 0.32"-3.94" | 78.7" max | 236.2" max |
Gr.2, Titanium Coils & Sheets, Titanium plates, Titanium board, ASTM B265
Titanium Sheet Coil & Strip:
Baoji Titanium Wire Industry Co., Ltd. produces cold rolled and annealed, sheet, coil and strip in all titanium grades required for the construction of titanium process equipment. Material is produced to customer order requirements with a maximum width of 49.2” (1250mm) for sheet thickness ranging from 0.016” (0.41mm) up to 0.1874” (4.76mm). Industrial Titanium sheet, coil and strip are supplied in accordance with ASTM, ASME standards in Grades 1, 2, 4, 7, 11, 12, 16, 17 & 37. Additional specifications such as Norsok, DIN, PED and customer specific specifications can be quoted following a review by the quality assurance and process engineering departments.
Chemical Compositions:
| Grade | N | C | H | Fe | O | Al | V | Pd | Mo | Ni | Ti |
| Gr. 1 | 0.03 | 0.08 | 0.015 | 0.20 | 0.18 | / | / | / | / | / | Bal |
| Gr. 2 | 0.03 | 0.08 | 0.015 | 0.30 | 0.25 | / | / | / | / | / | Bal |
| Gr. 3 | 0.05 | 0.08 | 0.015 | 0.30 | 0.35 | / | / | / | / | / | Bal |
| Gr. 4 | 0.05 | 0.08 | 0.015 | 0.50 | 0.40 | / | / | / | / | / | Bal |
| Gr. 5 | 0.05 | 0.08 | 0.015 | 0.40 | 0.20 | 5.5-6.75 | 3.5-4.5 | / | / | / | Bal |
| Gr. 7 | 0.03 | 0.08 | 0.015 | 0.30 | 0.25 | / | / | 0.12-0.25 | / | / | Bal |
| Gr. 9 | 0.03 | 0.08 | 0.015 | 0.25 | 0.15 | 2.5-3.5 | 2.0-3.0 | / | / | / | Bal |
| Gr. 12 | 0.03 | 0.08 | 0.015 | 0.30 | 0.25 | / | / | / | 0.2-0.4 | 0.6-0.9 | Bal |
| Gr. 16 | 0.03 | 0.08 | 0.015 | 0.30 | 0.25 | / | / | 0.04-0.08 | / | / | Bal |
| Gr. 17 | 0.03 | 0.08 | 0.015 | 0.20 | 0.18 | / | / | 0.04-0.08 | / | / | Bal |
| Gr. 23 | 0.03 | 0.08 | 0.013 | 0.25 | 0.13 | 5.5-6.50 | 3.5-4.5 | / | / | / | Bal |
Mechanical Property:
| Grade | Tensile Strength(min) | Yeild Strength, 0.2% Offset | Elongation in 2in. Or 50mm. Min. (%) | Bend Test | |||||
| min. | max. | Under 0.070" (1.8mm) in Thickness | 0.070"-0.187" (1.8 - 4.75mm) in Thickness | ||||||
| ksi | MPa | ksi | MPa | ksi | MPa | ||||
| Gr. 1 | 35 | 240 | 25 | 170 | 45 | 310 | 24 | 3T | 4T |
| Gr. 2 | 50 | 345 | 40 | 275 | 65 | 450 | 20 | 4T | 5T |
| Gr. 3 | 65 | 450 | 55 | 380 | 80 | 550 | 18 | 4T | 5T |
| Gr. 4 | 80 | 550 | 70 | 483 | 95 | 655 | 15 | 5T | 6T |
| Gr. 5 | 130 | 895 | 120 | 828 | --- | --- | 10 | 9T | 10T |
| Gr. 7 | 50 | 345 | 40 | 275 | 65 | 450 | 20 | 4T | 5T |
| Gr. 9 | 90 | 620 | 70 | 483 | --- | --- | 15 | 5T | 6T |
| Gr. 12 | 70 | 483 | 50 | 345 | --- | --- | 18 | 4T | 5T |
| Gr. 16 | 50 | 345 | 40 | 275 | 65 | 450 | 20 | 4T | 5T |
| Gr. 17 | 35 | 240 | 25 | 170 | 45 | 310 | 24 | 3T | 4T |
| Gr. 23 | 120 | 828 | 110 | 759 | --- | --- | 10 | 9T | 10T |
