Titanium plates, Titanium Sheets, ASTM B265, ASTM F67, ASTM F136, surgical implants, Aerospace, Industrial
Grades:
CP Ti Grades 1, 2, 3, 4, 7/11, 12
Ti 6Al-4V, Ti 6Al-4VELI, Ti-3Al-2.5V, Ti6242 (6Al-2Sn-4Zr-2Mo),
Specifications:
ASTM B265 / ASME SB265, ASTM F136, ASTM F67, AMS4911
Thickness:
From 0.012"-0.1875"
From 0.3-4.76mm
Specifications of Titanium sheet:
| Product | Thickness (mm) | Width (mm) | Length (mm) |
| Titanium Sheet | 0.5-0.8 | 800 max, Ti 6Al-4V | 2000 max |
| 1000 max, CP Ti | |||
| Titanium Sheet | 0.8-5 | 1000 max | 3000 max |
| Titanium Plate | 5-8 | 2000 max | 4000 max |
| Titanium Plate | 8-100 | 2500 max | 6000 max |
| Product | Thickness (inches) | Width (inches) | Length (inches) |
| Titanium Sheet | 0.020"-0.032" | 31.5" max, Ti-6Al-4V | 78.7" max |
| 39.4" max, C.P. Ti | |||
| Titanium Sheet | 0.032"-0.20" | 39.4" max | 118.1" max |
| Titanium Plate | 0.20"-0.32" | 78.7" max | 157.5" max |
| Titanium Plate | 0.32"-3.94" | 78.7" max | 236.2" max |
Baoji Titanium Wire Industry Co., Ltd. produces hot rolled annealed and pickled plate (HRAP) in all titanium grades required for construction of titanium process equipment. Individual plates are made to customer order requirements with a maximum width of 96” (2438mm) for plate thickness ranging from 0.1875” (4.76mm) up to 4” (101.6mm). Industrial Titanium plate is supplied in accordance with ASTM, ASME standards in Grades 1, 2, 4, 7, 11, 12, 16 & 17. Additional specifications such as DIN, PED and other customer specific specifications can be quoted following a review by the quality assurance and process engineering departments.
Chemical Compositions:
| Grade | N | C | H | Fe | O | Al | V | Pd | Mo | Ni | Ti |
| Gr. 1 | 0.03 | 0.08 | 0.015 | 0.20 | 0.18 | / | / | / | / | / | Bal |
| Gr. 2 | 0.03 | 0.08 | 0.015 | 0.30 | 0.25 | / | / | / | / | / | Bal |
| Gr. 4 | 0.05 | 0.08 | 0.015 | 0.50 | 0.40 | / | / | / | / | / | Bal |
| Gr. 5 | 0.05 | 0.08 | 0.015 | 0.40 | 0.20 | 5.5-6.75 | 3.5-4.5 | / | / | / | Bal |
| Gr. 7 | 0.03 | 0.08 | 0.015 | 0.30 | 0.25 | / | / | 0.12-0.25 | / | / | Bal |
| Gr. 9 | 0.03 | 0.08 | 0.015 | 0.25 | 0.15 | 2.5-3.5 | 2.0-3.0 | / | / | / | Bal |
| Gr. 12 | 0.03 | 0.08 | 0.015 | 0.30 | 0.25 | / | / | / | 0.2-0.4 | 0.6-0.9 | Bal |
| Gr. 16 | 0.03 | 0.08 | 0.015 | 0.30 | 0.25 | / | / | 0.04-0.08 | / | / | Bal |
| Gr. 17 | 0.03 | 0.08 | 0.015 | 0.20 | 0.18 | / | / | 0.04-0.08 | / | / | Bal |
| Gr. 23 | 0.03 | 0.08 | 0.013 | 0.25 | 0.13 | 5.5-6.50 | 3.5-4.5 | / | / | / | Bal |
Mechanical Property:
| Grade | Tensile Strength(min) | Yeild Strength, 0.2% Offset | Elongation in 2in. Or 50mm. Min. (%) | Bend Test | |||||
| min. | max. | Under 0.070" (1.8mm) in Thickness | 0.070"-0.187" (1.8 - 4.75mm) in Thickness | ||||||
| ksi | MPa | ksi | MPa | ksi | MPa | ||||
| Gr. 1 | 35 | 240 | 25 | 170 | 45 | 310 | 24 | 3T | 4T |
| Gr. 2 | 50 | 345 | 40 | 275 | 65 | 450 | 20 | 4T | 5T |
| Gr. 3 | 65 | 450 | 55 | 380 | 80 | 550 | 18 | 4T | 5T |
| Gr. 4 | 80 | 550 | 70 | 483 | 95 | 655 | 15 | 5T | 6T |
| Gr. 5 | 130 | 895 | 120 | 828 | --- | --- | 10 | 9T | 10T |
| Gr. 7 | 50 | 345 | 40 | 275 | 65 | 450 | 20 | 4T | 5T |
| Gr. 9 | 90 | 620 | 70 | 483 | --- | --- | 15 | 5T | 6T |
| Gr. 12 | 70 | 483 | 50 | 345 | --- | --- | 18 | 4T | 5T |
| Gr. 16 | 50 | 345 | 40 | 275 | 65 | 450 | 20 | 4T | 5T |
| Gr. 17 | 35 | 240 | 25 | 170 | 45 | 310 | 24 | 3T | 4T |
| Gr. 23 | 120 | 828 | 110 | 759 | --- | --- | 10 | 9T | 10T |
